Operation and follow-up maintenance of CNC milling machine

Processing range of small CNC milling machine

(1) Plane processing. The milling plane of the CNC machine tool can be divided into the horizontal plane (xY) processing of the workpiece, the front plane (xZ) processing of the workpiece and the side plane (yZ) processing of the workpiece. As long as the CNC milling controlled by two platinum and a half can be used to complete such plane milling processing.

(2) Surface processing. If you mill complex curved surfaces, you need to use three-axis or even more-axis CNC milling.

After the CNC milling machine is used up, don't just leave it alone. It needs good maintenance, that is, the cleaning work needs to be done after use. The specific maintenance methods are as follows:

At that time, after the CNC milling machine was used up, the parts were processed, and the body of the CNC milling machine, drill floor and other places would have all kinds of debris left after using the CNC milling machine to process the parts, and there would even be a lot on the ground near the CNC milling machine. Crumbs. Don't underestimate these crumbs. Because it doesn't matter if you don't clean up this time, if you don't clean up next time, if you don't clean up next time, problems will occur over time. I want to clean up after a long time, but it's not easy to clean up. This is the problem that gives us a headache.

When the CNC milling machine speed reference signal is a step signal, the CNC milling machine current regulator inputs a large value, but its value has reached the set saturation value. At this time, the CNC milling machine motor runs at the maximum limit current controlled by the system, so that the CNC milling machine motor always maintains the maximum torque and maximum acceleration during the acceleration process, so as to shorten the starting and braking process